Options
Settings live on two info tabs, Options and MoreOptions, and are saved to
%APPDATA%\PlatAnJr\PlatAnJr.ini as you change them. They are application-wide, not
per-dataset.
Options ▸ Data
Loading
| Setting |
Effect |
| Preview Downsizer |
The fraction of events preview mode keeps: 1/2 ... 1/10, 1/50, 1/100 |
| Preview Max Cells/Well |
Instead of a fraction, cap each well at this many events |
| Autoload Layout |
Records the preference, but has no effect in this build - the layout reused between sessions is INFO\PlateMap.csv |
Ticking the max-cells option unticks the downsizer, and vice versa - exactly one is in
force. Neither has any effect until the Preview mode toolbar button is pressed, and
neither changes the data already loaded. See Preview mode.
Histograms
| Setting |
Effect |
| Number of Bins |
Default bin count for histograms |
| Cheating is on |
Hides the bin-count controls and lets PlatAnJr choose the binning itself |
| Log Scale |
Use a logarithmic count axis on histograms |
Gating
| Setting |
Effect |
| Autogate vertices |
The most vertices a gate drawn by a chart node's Autogate button gets: 3 to 64, 8 by default. It applies from the next gate; gates already drawn keep theirs |
Display
| Setting |
Effect |
| Gray Scale |
Draw density maps in greyscale instead of the colour ramp - the right choice for a figure going to a journal that charges for colour |
| Project BG Color |
Background colour of the project panel |
| Show AE Axes |
Draw each parameter's axis on the autoencoder plot - see Dimensionality reduction |
| Use GPU for Autoencoder |
Train the autoencoder on an NVIDIA card - needs the GPU package in the program folder (where the card cannot be used, the tooltip says why), and pays off with a large batch size. See Dimensionality reduction |
| Sort Ribbon Plot |
Order the ribbons in a ribbon plot rather than leaving them in selection order |
For FCS standard violators
What the unmixer's Save writes as each unmixed parameter's $PnN - its name - and
$PnS. The FCS standard means $PnN for the analyte - the marker, CD4 - and $PnS for the
stain - the dye, BV650 - and that is the default. If the software that will read the
files expects them the other way round, or wants both in the name, say so here.
The same setting names the parameters Add Unmixed Parameters puts in the dataset, and
any parameter you rename in the Save / export data dialog before Save Plate or
Save As File: there New Name is the analyte and New Stain the stain, and the
one you leave blank is what the parameter has - for an unmixed parameter its control's
analyte or stain, for any other its $PnN or $PnS. A parameter you do not rename is saved
as it is.
| Setting |
Effect |
| $PnN |
Analyte (the default), Stain, Analyte-Stain or Stain-Analyte |
| $PnS |
Stain (the default), Analyte, Analyte-Stain, Stain-Analyte or Nothing |
The analyte and the stain are the unmixer's two name fields, which always hold the marker
and the dye; this setting does not change them. A control with only one of the two gives
that one alone, without a dangling -. Nothing writes no $PnS. $PnN is never left
empty: when the part it asks for is not known - the stain of a control that has none - it
takes the other, and failing both the control's file name.
Whatever is set here, the files also carry the analyte as $PnANALYTE and the stain as
$PnTAG, and $PnN is kept fit for naming a parameter: no commas, and unique in the file,
a name already taken getting a number appended. See
Unmixing.
The setting applies from the next Save, add or rename; parameters already added keep the
names they were added under. Changing it is noted in the log.
Export
| Button |
Effect |
| Export All |
Exports data file well by well as CSV file. Data are rounded to integer |
| Export Bands |
Write the device band definitions to a folder |
Dose response
| Setting |
Effect |
| Compute IC50 |
Fit dose-response curves |
| Distance / Metric |
The distance metric used for comparisons |
Options ▸ Parameter Scales
Not a settings page but a diagnostic one: a table of every parameter with its file name,
database name and data range, and two charts drawing the selected parameter's transform and
its inverse. See The Parameter Scales page.
Options ▸ SMILES
Chemical-structure support for compound screens: browsing structures and loading a SMILES
file.
MoreOptions
Display and rendering settings. Most take effect on the next redraw; some have an Apply
button beside them.
Colour and density
| Setting |
Effect |
| Color Scheme |
The palette for density maps |
| Color Scheme for Gates |
The palette new gates take their colours from |
| Color map for Bars and Spectra Plots |
The palette for ribbon and spectrum plots |
| Gamma for Color Scales |
Gamma applied to the colour ramp |
| Gamma Shape |
The shape of the gamma curve: S-shape, Concave, S - inverted or Convex |
| Equalize |
Spread density over the whole colour range so faint populations show. Excellent for looking, misleading for judging relative abundance |
Plots
| Setting |
Effect |
| Default Scatter Plot Dot Size |
Marker size for new chart nodes |
| Histogram Bins |
Bin count for ribbon and node histograms |
| Downscaling Factor |
Reduce the number of points drawn on dense plots |
| Butterfly Ribbon Plot |
Mirror ribbon profiles about their axis |
| Log Butterfly Profile |
Logarithmic profile width |
| Show Gate Stats |
Draw gate statistics on the plots themselves |
| SSM Gate Width |
How far the gates of SSM nodes reach from their peaks, in half-maximum widths: 1 to 3, 2 by default. Every SSM node refits its gates when it changes |
Project panel
| Setting |
Effect |
| Links without Loops |
Draw the links of the gating graph as single curves, as the cell diagram draws its links, where they would otherwise loop round because the pins of two nodes cross. Only a link to a node standing wholly to the left of its own still loops round. The nodes reorder their pins to suit. Takes effect at once; off by default |
Unmixing and simulation
| Setting |
Effect |
| Smoothing Factor For Unmixing |
Smoothing applied during unmixing |
| Blend Area and Photon Count, Test Blend Area and Photons, Test Poisson |
Simulation and test utilities |
Behaviour
| Setting |
Effect |
| Annoying Mode |
Requests confirmation when the protocol is changed. Asks to save an unsaved project before Erase project, Load Project and closing. It is off whenever PlatAnJr starts and is not remembered - turn it on for the session to be asked. See Projects |
Info
Reference rather than settings:
| Tab |
Shows |
| Parameter Info |
Per-parameter metadata - a row for every parameter of the dataset, those added since it was opened included - with Export Table To CSV; also Embedding Divergence and Distance Histogram |
| FCS Info |
The raw FCS keywords of the selected file - the authority when a name or range looks wrong |
| Calibration |
Sensor calibration data, used by Straiten |
| Metadata |
File-level metadata |
Copyright
Version and licence information. Quote the version shown here in any bug report.